• High-viscosity C-silicone putty for compatible impression techniques.
• Initial flow supports adaptation to the tray and oral structures under pressure.
• High final rigidity helps the set putty maintain its form.
• Green colour provides clear visual identification of the base material.
• Mint flavour is intended to improve patient acceptance.
• Compatible with Zhermack Indurent gel catalyst when used according to the system instructions.

Zhermack Zetaplus C Silicone Impression Material – Putty (900 ml Base Only)

Advantages:• Minimizes mucous compression during insertion in the oral cavity
• Achieves excellent hardness after setting
• Functions effectively as a special tray in two-stage techniques
• Adapts to low-viscosity materials during double-mixing procedures
• Offers adjustable working and setting times depending on catalyst (Indurent gel) quantity

• Clinical working time* (min:s) - 1:15
• Time in mouth* (min:s) - 3:30
• Setting time(min:s) - 4:45

•  1 x 900ml Bucket 

1. Select a rigid impression tray and apply the compatible tray adhesive where required.
2. Measure or dispense the selected Zhermack C-silicone base material and the correct amount of compatible Indurent catalyst according to the product IFU.
3. Mix thoroughly by hand or on a clean mixing pad until a uniform, streak-free colour is obtained.
4. Load the tray or apply the wash material using the selected one-stage or two-stage impression technique.
5. Seat the tray promptly and keep it stable until the material has completely set.
6. Remove the impression carefully, inspect the reproduced detail and trim excess material where appropriate.
7. Rinse and disinfect the impression using a compatible protocol before casting or laboratory processing.

Manufactured by: Zhermack S.p.A., Italy

Not Applicable