Enter an item name and press add.
Microprocessor-controlled automatic mixer for repeatable preparation of dental alginates and plasters using programmable mixing cycles.
₹116053
₹140000
(17% OFF)
2321
Delivery Location
• Automatic mixing supports repeatable alginate and plaster consistency.
• Twenty programmable cycles simplify use with different materials.
• Microprocessor control manages programmed mixing parameters.
• Hermetic mixing vessels help contain material during operation.
• Compact bench-top footprint for dental practices and laboratories.
• Supplied with dedicated alginate and stone mixing vessels.
• Smooth equipment surfaces support routine cleaning.
• Designed to reduce operator variability compared with manual spatulation.
Zhermack Hurrimix C305130 is a 230 V automatic alginate and plaster mixer with 20 programmable cycles for consistent dental material preparation. The 400 W bench-top unit is supplied with dedicated mixing vessels and measuring accessories for professional dental and laboratory workflows.
• Product code: C305130
• Model: Hurrimix
• Electrical supply: 230 V / 50 Hz
• Power: 400 W
• Programs: 20 programmable cycles
• Maximum dental stone quantity: Approx. 100 g
• Dimensions: 24 × 30 × 31 cm
• Unit weight: 22 kg
1 Pack Contains:
• 1 × Zhermack Hurrimix C305130 mixer
• 2 × Alginate mixing vessels
• 2 × Stone mixing vessels
• 1 × Water measuring bottle
• 1 × Spatula
• 1 × Premixing stick/accessory
1. Place Hurrimix on a stable, level bench with adequate clearance and connect it to the correct 230 V supply.
2. Select the correct vessel for alginate or dental stone.
3. Measure powder and water strictly according to the material manufacturer’s instructions and premix if required.
4. Place the measured mixture into the vessel and secure the lid completely.
5. Insert the vessel in the mixer and select the programmed cycle appropriate for the material.
6. Close the machine lid and start the cycle.
7. Wait for the cycle to finish fully before opening the unit or removing the vessel.
8. Use the mixed material immediately according to its working time.
9. Clean and dry the vessel, spatula and measuring accessories after use and maintain the machine according to the equipment manual.
Manufactured by: Zhermack S.p.A., Italy
12 Months
Buy More, Save More
Have Questions About This Product ?