• Excellent transparency supports light transmission through the set matrix.
• Designed to support photopolymerisation of compatible restorative composites.
• Medium-bodied consistency supports controlled placement.
• High final hardness helps the set matrix maintain its form during repositioning.
• Dimensionally stable material supports accurate restorative workflows.
• The cured matrix can be repositioned and finished where required by the clinical technique.

Elite Glass is a medium-bodied addition silicone specifically designed for creating transparent matrices in aesthetic reconstructions using light-curing composites, suitable for both direct and indirect techniques. Its high transparency and optimal processing time make it especially effective for treating dyschromia, diastemas, fractures, rotations, conoids, and other dental malformations.

Key Characteristics:• Dimensionally stable over time and after disinfection, ensuring precision
• High final hardness (70 Shore A) for reliable handling
• Easily repositionable in the mouth once polymerized
• Can be finished with cutters or other sharp instruments after polymerization
Applications:• Creation of transparent matrices for the veneering technique

Product: Elite Glass

Color: Transparent

Delivery System: 1:1 Dispenser

Recommended Technique: Monophase impression

Viscosity: Medium

Recommended Applications: Transparent matrices for veneering

Setting Type: Fast

Working Time: 0:40 min

Setting Time: 2:10 min

Detail Reproduction: 20 μm

Linear Dimensional Change (24 h): 0.18%

Hardness (Shore A): 70

Storage:• Store at room temperature.
• Shelf life: 36 months when stored properly between 5° and 27 °C (41°–80 °F)

• 2 x 50ml cartridges (Base + Catalyst)
• 6 x mixing tips medium/green

1. Prepare the tooth or restoration and select a rigid transparent tray or matrix technique appropriate for the case.
2. Load the Elite Glass cartridge into a compatible 1:1 dispenser and confirm even flow of base and catalyst.
3. Attach a new compatible mixing tip and dispense the material into the selected transparent tray or matrix.
4. Position the material without trapping voids and keep it stable until complete setting.
5. Remove the set matrix carefully, rinse it and dry it gently.
6. Use the transparent matrix for the planned light-curing composite procedure according to the restorative material instructions.
7. Rinse and disinfect the matrix using a compatible protocol before any permitted reuse.

Manufactured by: Zhermack S.p.A., Italy

Not Applicable