• Superior flow properties
• High polishability for a smooth finish
• Non-sticky to instruments
• Maintains stability during sculpting
• Outstanding radiopacity for clear X-ray visibility
• Natural fluorescence
• Excellent handling characteristics
• Minimal shrinkage and wear resistance
• Achieves a high-gloss finish
• Easily conforms to cavity preparations

Product Overview: ReCreate-LC Flow

• Light-curing, radiopaque, flowable composite with high strength and excellent wear resistance
• Suitable for anterior and posterior restorations
• Optimized viscosity ensures excellent wetting and adaptation to cavity walls
• Designed for use with dentine/enamel etching and bonding systems
• Provides excellent cavity adaptation, helps prevent air entrapment, and accelerates restoration workflow

Indications for Use

• Restoring minimally invasive cavities of all classes
• Filling small Class I cavities and for extended fissure sealing
• Direct filling of Class V (cervical caries)
• Suitable for V-shaped cavities and root erosion repairs
• Repair of ceramic and composite resin veneers
• Blocking out undercuts before impression taking
• Luting translucent prosthetic and orthodontic components

Contraindications

• Known drug idiosyncrasies
• Use with caution in patients allergic to methacrylate compounds

Available Shades

• A1, A2, A3, B2

Composition

• Bisphenol A Glycidyl Methacrylate (Bis-GMA)
• Urethane Dimethacrylate (UDMA)
• Triethylene Glycol Dimethacrylate (TEGDMA)
• Ethoxylated Bisphenol A Dimethacrylate
• Silanated Glass Filler
• Amorphous Fumed Silica
• Inorganic Filler Content: 68%

Storage Instructions

• Store between 5 °C and 25 °C in a tightly sealed container
• Ensure the container is closed immediately after use
• Do not use the material past the expiry date
• Shelf life: 2.5 years

• 2 x ReCreate LC Flow 2.5gm

Instructions for Use – SafeEndo ReCreate LC Flow

✅ Shade Selection:

• Clean the tooth surface using a fluoride-free cleaning paste.
• Use the ReCreate LC Flow shade guide to determine the appropriate shade:
• Ensure both the tooth and shade tab are moistened.
• Perform shade selection in natural daylight for accuracy.

✅ Cavity Preparation:

• Follow standard adhesive restorative principles, focusing on minimally invasive techniques to preserve healthy tooth structure.
• Bevel the enamel margins as needed.
• Thoroughly clean and dry the cavity before application.

✅ Material Application:

• Allow the material to reach room temperature before use.
• For approximal cavities, place a matrix—preferably transparent—to aid in shaping.
• Attach the application cannula to the syringe by turning it clockwise until secure.
• Apply ReCreate LC Flow directly into the cavity.
• For cavities deeper than 2 mm, apply the material in layers, curing each layer separately.

✅ Light-Curing:

• Suitable for use with halogen or LED curing lights:
• Halogen lights: minimum 500 mW/cm²
• LED lights: minimum 300 mW/cm²
• Cure each layer for at least 10 seconds.
• Hold the curing light as close as possible to the surface.
• A distance >5 mm may reduce curing depth and lead to poor polymerization, which can cause discoloration or pulp irritation.

✅ Finishing and Polishing:

• After removing any matrices or shaping aids, you may begin finishing and polishing immediately.
• Use fine or extra-fine diamonds or polishing discs for best results.
• Always cool the material during polishing to prevent heat damage.
• Fluoridate the filling margins, or preferably the entire tooth, as a final step for added protection.