• Seals dentinal tubules, reducing post-operative sensitivity
• Exhibits low film thickness for precise application
• Provides high compressive strength
• Radiopaque for easy radiographic detection
• Neutralizes the hardness of phosphoric acid
• Can be applied directly to prepared dentin

Zinc F+ is a versatile zinc phosphate cement ideal for the cementation of crowns, bridges, inlays, facings, and orthodontic brackets. It can also be used as a cavity liner under all restorative materials, for temporary fillings, and for restorations in deciduous teeth.

With universal application, Zinc F+ serves as a reliable cement for crowns and bridges, as well as a liner, core, or base material. It ensures an exceptionally accurate fit while providing high mechanical strength for long-lasting restorations.

Benefits:

• High-strength bases providing excellent pulpal protection
• Modulus of elasticity similar to natural tooth structure
• Superior luting cement with high retention rates

Indications:

• Cavity lining under all restorative materials
• Cementation of crowns, bridges, inlays, and orthodontic brackets
• Temporary restorations
• Restorations in deciduous teeth

Technical Data

• Mixing Time: 60–90 seconds
• Setting Time: 3 minutes 15 seconds (luting), 3 minutes 10 seconds (base)
• Film Thickness: 22 µm
• Compressive Strength: 105 MPa

Composition

• Powder: Zinc Oxide, Magnesium Oxide, Sodium Fluoride
• Liquid: Aqueous solution of Phosphoric Acid

Contraindications

• Not to be used for direct or indirect pulp capping

Storage Conditions

• Store at 10 °C to 24 °C
• Keep the cap tightly closed after use
• Protect from moisture
• Shelf life remains unaffected after opening if stored in a cool, dry place

Shelf Life

• 3 years from the date of manufacture

Powder-Liquid Kit 

• 1 X Powder Jar 30g
• 1 X Liquid Bottle 15ml
• 1 X Instruction manual
• 1 X Spoon

• Shake the powder jar well before use.
• Dispense 2 spoons of powder and 5–6 drops of liquid onto a cool glass slab.
• Mixing generates heat due to an exothermic reaction; mix in small fractions to manage temperature.
• Gradually add powder to liquid in small portions (recommended 1/8 or 1/4) to achieve the desired consistency.
• Continue mixing for 45–60 seconds until a smooth paste is formed.
• Rinse the tooth surface thoroughly with water and gently air dry.
• Apply a thin layer of Zinc F+ over the tooth structure and interfacing metal surfaces before joining.
• For maximum bond strength, allow Zinc F+ to set for 3:00–3:10 minutes while compressing the metal and tooth surfaces together.
• Advise the patient to bite firmly onto a cotton ball without intermittent relaxation; this removes excess cement, reduces film thickness, and enhances bond strength.

• Country of Origin: India
• Manufacturer: Prevest Denpro

• Warranty is not applicable for this product