* Superior flexural and tensile strength resists intraoral fracture during long-term temporary wear.
* Automix cartridge system ensures bubble-free, homogeneous dispensing with zero manual handling.
* Exothermic setting reaction remains exceptionally low to preserve pulp vitality and patient comfort.
* High polishability yields a natural, glossy surface that closely matches real tooth enamel.
* Excellent marginal fit reduces microleakage and minimizes post-operative cervical sensitivity.
* Biocompatible formula protects soft tissues from irritation while maintaining tissue contour.

Prevest Denpro Oratemp C&B is an advanced self-curing temporary crown and bridge material formulated from high-grade methacrylate composite resins. Engineered specifically for provisional prosthodontic restorations, it enables clinicians to fabricate strong, visually pleasing temporary crowns, multi-unit bridges, inlays, and onlays directly chairside with minimal effort.
The material features an optimized 1:1 automix delivery system that eliminates manual proportioning errors and ensures a dense, bubble-free mix every single time. Its controlled setting reaction generates very low heat, making it clinically safe for vital abutment teeth and enhancing patient comfort throughout the provisional phase.
Oratemp C&B exhibits remarkable flexural strength and dimensional stability, ensuring that restorations resist occlusal forces and maintain precise marginal adaptation over extended wear periods. Available in popular VITA shades such as A1, A2, and A3, it polishes effortlessly to achieve a smooth, natural sheen that effectively resists plaque accumulation and marginal staining.

* Material: Auto-curing methacrylate composite resin
* Mixing Ratio: 1:1 base to catalyst
* Working Time: 45 seconds to 1 minute
* Setting Time: 2 to 3 minutes (intraoral)
* Flexural Strength: ~100 MPa
* Radiopacity: Radiopaque
* Shade Options: A1, A2, A3
* Net Quantity: 67 g (50 ml) cartridge
* Storage Conditions: Store below 25°C in a cool, dry place
* Shelf Life: 2 years

1 Pack Contains:
* 1 × Cartridge – 67 g (50 ml)
* 10 × Automix Tips

1. Take a pre-operative alginate or silicone impression of the clinical area before tooth preparation.
2. Complete the abutment preparation, clean the site, and lightly dry without excessive desiccation.
3. Insert the Oratemp C&B cartridge into a 1:1 dispensing gun and attach an appropriate mixing tip.
4. Express a small amount of material onto a pad to confirm even dispensing, then fill the impression area.
5. Place the filled impression over the prepared teeth intraorally within the working time frame.
6. Retain in position until the material achieves a rubbery consistency, then remove carefully.
7. Allow complete self-cure outside the mouth, trim excess flash with fine burs, and polish to high gloss.
8. Cement the provisional restoration onto prepared teeth using a non-eugenol temporary cement.

Manufactured by: Prevest Denpro Limited, India

Not Applicable