* Superior hydrophilic formulation adapts smoothly to damp intraoral surfaces to record intricate tissue contours.
* High tear strength prevents distortion or tearing along delicate subgingival margins during removal.
* Thermally responsive setting kinetics allow ample intraoral placement time before rapidly curing in the mouth.
* Thixotropic, non-slump consistency stays firmly on impression trays without dripping into the pharynx.
* Excellent dimensional stability allows accurate stone model pouring up to four weeks after impression taking.
* Tolerates minor base-to-catalyst proportioning variations up to 20% without impairing final physical properties.
* Compatible with both one-step wash and two-step putty-wash impression clinical methodologies.
* Cold sterilization protocols can be completed safely without causing dimensional distortion.

NeoEndo Neopure A-Silicone Impression Material is an addition-cured vinyl polysiloxane system engineered for precision crown, bridge, and implant impressions. Its advanced chemical structure features high hydrophilicity, enabling the material to displace oral fluids and flow smoothly into narrow gingival sulci. This ensures clear recording of subgingival finish lines without void formation.
The kit supplies heavy-bodied putty alongside auto-mix light body cartridges to accommodate both single-step and two-step putty-wash impression workflows. The putty offers a firm tray support structure, while the light body provides a low-viscosity wash that captures fine surface texture. Due to its high elastic recovery and tear resistance, the impression maintains its structural integrity during removal past severe anatomical undercuts.
Formulated with exceptional dimensional retention, impressions made with Neopure can be stored safely or poured multiple times over a 30-day period without sacrificing accuracy. The material's neutral taste and no-drip thixotropic consistency enhance patient comfort during clinical procedures.

* Material Class: Vinyl polysiloxane addition silicone (A-Silicone)
* Delivery Type: Manual mixing for Putty; 1:1 auto-dispensing cartridge for Light Body
* Putty Mixing Time: 30 seconds
* Putty Working Time: 1 minute 30 seconds
* Putty Setting Time: 3 minutes
* Shore A Hardness: Putty 67; Light Body 56
* Linear Shrinkage: Minimal
* Dimensional Stability: Up to 30 days
* Elastic Recovery: High
* Color: Putty Base Green, Catalyst White
* Shelf Life: 2 years

1 Pack Contains:
* 1 × Putty Base Tub – 400 g
* 1 × Putty Catalyst Tub – 400 g
* 2 × Light Body Cartridges – 50 ml
* 12 × Mixing Tips
* 12 × Intraoral Tips

1. Prepare the tooth preparations, place retraction cords if required, and ensure the arches are clean and isolated.
2. Scoop equal measures of base and catalyst putty using the color-coded scoops.
3. Knead the putty base and catalyst using fingertips for approximately 30 seconds until a homogeneous streak-free color is obtained.
4. Load the mixed putty into an appropriate impression tray.
5. Dispense the light body wash material directly around the prepared tooth margins using a 1:1 mixing gun equipped with intraoral tips.
6. Seat the impression tray firmly into the patient's mouth within the working time frame.
7. Hold the tray motionless in place until the intraoral set time is fully complete.
8. Gently remove the tray from the mouth, rinse under running water, disinfect, and inspect for subgingival detail reproduction.

Manufactured by: Orikam Healthcare India Pvt. Ltd., India

Not Applicable