• Eugenol-free formulation suitable when subsequent resin bonding is planned.
• Provides reliable temporary retention of provisional restorations.
• Low film thickness supports accurate seating of restorations.
• Offers good adhesion while allowing convenient removal when required.
• Provides effective sealing around temporarily cemented restorations.
• Smooth two-paste system enables easy chairside mixing.
• Helps minimise residual cement during removal and cleaning.
• Suitable for crowns, bridges, inlays and onlays.
• Can be used for temporary cementation on implant abutments.

Maarc T-Lute NE is a self-curing, non-eugenol temporary luting cement developed for provisional cementation of dental restorations. Its two-paste formulation provides convenient mixing and controlled handling during chairside procedures.

The cement offers a combination of reliable temporary retention and convenient removal, making it suitable for provisional crowns, bridges, inlays and onlays. Its low film thickness helps restorations seat accurately while providing an effective temporary seal.

Because the formulation does not contain eugenol, it is suitable where resin-based bonding or permanent cementation may be performed later. T-Lute NE can also be used for temporary fixation of crowns and bridges on implant abutments.

• Brand: MAARC
• Product Name: T-Lute NE
• Product Code: 8991/001
• Product Type: Non-Eugenol Temporary Luting Cement
• Curing Type: Self-Cure
• Form: Two-Paste System
• Base Quantity: 30 g
• Catalyst Quantity: 13 ml
• Eugenol-Free: Yes
• Film Thickness: Low
• Application: Temporary cementation of crowns, bridges, inlays and onlays
• Implant Use: Suitable for temporary fixation of crowns and bridges on implant abutments
• Shelf Life: 2 years from date of manufacture

1 × Base Paste – 30 g

1 × Catalyst – 13 ml

1 × Mixing Pad

1 × Nozzle

1. Clean and dry the prepared tooth and internal surface of the provisional restoration.
2. Dispense the required quantities of base and catalyst onto the supplied mixing pad.
3. Mix thoroughly until a smooth and homogeneous consistency is obtained.
4. Apply a thin layer of the mixed cement to the internal surface of the restoration.
5. Seat the crown, bridge, inlay or onlay firmly onto the prepared tooth.
6. Maintain the restoration in the correct position while the cement sets.
7. Remove excess cement carefully from the margins.
8. Check the occlusion and make adjustments if required.
9. At the final cementation appointment, remove the temporary restoration and clean residual cement from the preparation.

• Intended for professional dental use.
• Suitable for temporary fixation of provisional restorations.
• Can be used for crowns, bridges, inlays and onlays.
• Suitable for temporary fixation of crowns and bridges on implant abutments.
• Particularly useful where an eugenol-free temporary cement is preferred.
• Offers low film thickness, strong adhesion and easy removal.