* Cordless pen-style handpiece supports comfortable positioning around the oral cavity.

* Narrow 440–480 nm spectral output is designed for compatible light-cured dental materials.

* 8 mm, 70-degree light guide improves access to posterior regions.

* Light guide can be rotated to support different working positions.

* Rechargeable lithium-ion battery provides cordless chairside operation.

* Built-in radiometer on the charging unit supports routine output checking.

* One-button operation provides straightforward program selection.

* Replaceable battery and charger contacts support serviceability.

Kulzer Translux Wave is a cordless LED light-curing unit with an ergonomic pen-style handpiece and a narrow blue-light spectral range.

It is intended for polymerization of compatible dental materials whose photoinitiators respond within the 440–480 nm wavelength range.

The complete set includes the handpiece, battery, 8 mm light guide, glare shield, charging unit and power supply.

* Device Type: Cordless LED curing light

* Power Density: 1000 mW/cm²

* Wavelength: 440–480 nm

* Light Guide: 8 mm diameter, 70° angled

* Handpiece Dimensions: 210 mm length, maximum 23 mm diameter

* Charging Unit Dimensions: 140 × 60 × 60 mm

* Handpiece Weight: 145 g

* Charging Unit Weight: 437 g

* Battery: Rechargeable Li-ion, 3.6 V / 2000 mAh

1 Pack Contains:

* 1 × Translux Wave Handpiece with Rechargeable Battery

* 1 × 8 mm Light Guide

* 1 × Glare Shield

* 1 × Charging Unit

* 1 × Power Supply

1. Charge the handpiece fully in the supplied charging unit before clinical use.

2. Attach the clean 8 mm light guide and glare shield securely to the handpiece.

3. Check the light output using the charging unit radiometer before treatment.

4. Select the required curing program according to the restorative material instructions.

5. Position the light-guide tip close to and perpendicular to the material without contacting the restoration.

6. Activate the curing cycle for the exposure specified by the restorative-material manufacturer.

7. Clean and disinfect the handpiece and light guide according to the device instructions after use.

Manufactured by: Mectron S.p.A., Italy

Not specified