• Designed to stabilize and secure regenerative membranes.
• Suitable for guided bone regeneration and bone grafting procedures.
• Titanium membrane pins provide a dedicated fixation solution.
• Helps maintain membrane positioning over the grafted area.
• Available in 3.5 mm and 4.5 mm pin lengths.
• Membrane stabilizing pins are available as refills in sets of 5.
• Ergonomic design supports convenient clinical handling.
• Lightweight construction supports controlled instrument use.
• Designed for easy use during professional surgical procedures.
• Kit and refill options provide flexibility for clinical requirements.

The Julldent Membrane Stabilizing Kit and Refills (JULL-DENT 060) is a specialized dental surgical system designed for stabilizing regenerative membranes during bone grafting and guided bone regeneration procedures. Model JULL-DENT 060 is a membrane-stabilizing tac kit.
The system is designed to help maintain membrane positioning over the treatment area by using dedicated membrane stabilizing pins. Proper stabilization can help keep the membrane in the planned position during the surgical procedure.
The Julldent range includes a Membrane Tack Kit along with titanium membrane stabilizing pin refills. The refill pins are available in 3.5 mm and 4.5 mm lengths and are supplied in sets of five.
The product features an ergonomic and lightweight design intended for convenient professional use. The available product information also identifies a 2.4 mm hex diameter for the tack system. The Julldent Membrane Stabilizing Kit and Refills are intended for professional dental implantology, bone grafting and regenerative surgical procedures.

• Product type: Membrane Stabilizing Kit / Membrane Tack Kit
• Product code: JULL-DENT 060
• Application: Membrane stabilization during regenerative procedures
• Tack material: Titanium
• Tack system hex diameter: 2.4 mm
• Available tack lengths: 3.5 mm and 4.5 mm
• Refill configuration: Set of 5 membrane stabilizing pins
• Design: Ergonomic and lightweight
• Usage: Professional dental implantology and regenerative surgery

Membrane Tack Kit:
• 1 × Julldent Membrane Stabilizing Instrument / Tack System
• Compatible membrane stabilization accessories

Membrane Stabilizing Pin Refills:
• 5 × Titanium Membrane Stabilizing Pins – 3.5 mm
OR
• 5 × Titanium Membrane Stabilizing Pins – 4.5 mm

Note:
• Exact contents of the complete kit may vary depending on the selected product variant.

1. Select the appropriate membrane and prepare the grafting site according to the clinician's established surgical protocol.
2. Position the regenerative membrane over the intended treatment area.
3. Select the appropriate membrane stabilizing pin length according to the clinical requirement.
4. Load or engage the membrane tack using the compatible Julldent tack instrument.
5. Position the membrane carefully in the desired location.
6. Secure the membrane using controlled placement of the titanium stabilizing pin.
7. Check that the membrane remains properly positioned and adequately stabilized.
8. Place additional pins where clinically required to maintain stable membrane fixation.
9. Complete the grafting and surgical procedure according to the established clinical protocol.
10. Clean, inspect and process reusable instruments according to the applicable validated reprocessing protocol.

Manufactured by: Jullundur Surgical Works (JULL-DENT), India

Not Applicable