• Designed to collect autogenous bone material during implant site preparation.
• Integrates with a standard dental suction system.
• Detachable bone filter allows collected bone to be harvested and reused.
• Helps collect valuable cortical bone particles for augmentation procedures.
• Made from non-magnetic Stainless Steel 316.
• Corrosion-resistant construction supports repeated clinical use.
• Reusable design allows multiple applications.
• Filter capacity of 45 mm³ provides dedicated collection space for harvested bone.
• Can be sterilized at temperatures up to 177°C.
• Suitable for implantology and periodontal procedures.

The Julldent Bone Collector (JULL-DENT 058), also described as a Bone Collector Suction Tube / Bone Trap, is designed to collect autogenous bone material during dental implant site preparation.
The collector connects to a standard dental suction system. During implant site preparation, bone particles are drawn into the collector and retained by the detachable internal filter so the collected material can be retrieved for appropriate clinical use.
The instrument is made from stainless steel, is reusable and is designed for professional dental surgical workflows.

• Product type: Bone Collector / Suction Bone Trap
• Model: JULL-DENT 058
• Total length: 180 mm
• Filter capacity: 45 mm³
• Collector inside diameter: 18 mm
• Material: Non-magnetic Stainless Steel 316
• Sterilization: Up to 177°C
• Usage: Reusable
• Application: Implantology and Periodontics
• Connection: Compatible with standard dental suction systems

1 Pack Contains:
• 1 × Julldent Bone Collector Suction Tube / Bone Trap with Filter

1. Inspect and sterilize the Bone Collector according to the applicable validated reprocessing protocol before use.
2. Connect the Bone Collector to a compatible standard dental suction system.
3. Ensure that the detachable filter is correctly positioned inside the collector.
4. Begin the planned implant site preparation or bone-harvesting procedure according to the clinician's established protocol.
5. Allow the suction system to draw bone particles and irrigation fluid through the collector.
6. Bone particles are retained by the internal filter while the suction system removes fluid and debris.
7. After completing the required bone collection, disconnect the collector from the suction line.
8. Remove the filter carefully and retrieve the collected bone material for the planned augmentation procedure.
9. Clean, inspect and sterilize the collector and filter before subsequent use.

Manufactured by: Jullundur Surgical Works (JULL-DENT), India

Not Applicable