• Purpose-built torquing plier configuration for applying controlled torque to square or rectangular orthodontic archwires using the female pattern.
• Precision-finished working area supports controlled clinical handling.
• Constructed from stainless steel for professional reusable use.
• Balanced instrument geometry supports dependable hand control during routine procedures.
• Smooth, cleanable surfaces support standard dental instrument reprocessing.
• Suitable for repeated use when inspected, cleaned and sterilized according to validated clinic protocols.

GDC Torquing Plier - Female (3000/18) is designed for professional dental use where controlled handling and precise instrument positioning are important. Its working form supports applying controlled torque to square or rectangular orthodontic archwires using the female pattern. The model code 3000/18 identifies the exact GDC configuration for ordering and clinical set management.

Constructed from stainless steel, the instrument is intended for repeated professional use when correctly cleaned, inspected and sterilized. Before each procedure, confirm that the working end, joint and handle surfaces are intact and functioning smoothly. After use, remove debris promptly, clean and dry the instrument thoroughly, process it using a validated dental instrument sterilization protocol, and store it in a protected cassette or tray.

• Product Type: Torquing Plier
• Model / Code: 3000/18
• Material: Stainless steel
• Primary Use: Applying controlled torque to square or rectangular orthodontic archwires using the female pattern
• Reusability: Reusable professional dental instrument

1 Pack Contains:
• 1 × GDC Torquing Plier - Female (3000/18)

1. Inspect the torquing plier before use and confirm that the working area is clean, aligned and free from damage.
2. Clean and sterilize the reusable instrument using the clinic's validated dental instrument protocol.
3. Position the working end for applying controlled torque to square or rectangular orthodontic archwires using the female pattern with clear visibility of the treatment area.
4. Apply controlled hand pressure appropriate to the instrument's intended function; do not twist or overload the working tips.
5. Reposition as required rather than forcing the instrument when access or resistance is inadequate.
6. After use, remove debris promptly, clean and dry the instrument, then sterilize and store it in a protected tray or cassette.

Manufactured by: GDC Fine Crafted Dental Pvt. Ltd.; Country: India

Not Applicable