• Purpose-built three beak plier with cutter tc configuration for bending and cutting orthodontic wire or posts with a three-beak tungsten-carbide pattern.
• Precision-finished working area supports controlled clinical handling.
• Tungsten carbide working inserts provide a durable gripping or cutting surface for orthodontic use.
• Constructed from stainless steel with tungsten carbide working inserts for professional reusable use.
• Balanced instrument geometry supports dependable hand control during routine procedures.
• Smooth, cleanable surfaces support standard dental instrument reprocessing.
• Suitable for repeated use when inspected, cleaned and sterilized according to validated clinic protocols.

GDC Three Beak Plier With Cutter TC (3000/57TC) is designed for professional dental use where controlled handling and precise instrument positioning are important. Its working form supports bending and cutting orthodontic wire or posts with a three-beak tungsten-carbide pattern. The model code 3000/57TC identifies the exact GDC configuration for ordering and clinical set management.

Constructed from stainless steel with tungsten carbide working inserts, the instrument is intended for repeated professional use when correctly cleaned, inspected and sterilized. Before each procedure, confirm that the working end, joint and handle surfaces are intact and functioning smoothly. After use, remove debris promptly, clean and dry the instrument thoroughly, process it using a validated dental instrument sterilization protocol, and store it in a protected cassette or tray.

• Product Type: Three Beak Plier With Cutter TC
• Model / Code: 3000/57TC
• Material: Stainless steel with tungsten carbide working inserts
• Primary Use: Bending and cutting orthodontic wire or posts with a three-beak tungsten-carbide pattern
• Reusability: Reusable professional dental instrument

1 Pack Contains:
• 1 × GDC Three Beak Plier With Cutter TC (3000/57TC)

1. Inspect the three beak plier with cutter tc before use and confirm that the working area is clean, aligned and free from damage.
2. Clean and sterilize the reusable instrument using the clinic's validated dental instrument protocol.
3. Position the working end for bending and cutting orthodontic wire or posts with a three-beak tungsten-carbide pattern with clear visibility of the treatment area.
4. Apply controlled hand pressure appropriate to the instrument's intended function; do not twist or overload the working tips.
5. Reposition as required rather than forcing the instrument when access or resistance is inadequate.
6. After use, remove debris promptly, clean and dry the instrument, then sterilize and store it in a protected tray or cassette.

Manufactured by: GDC Fine Crafted Dental Pvt. Ltd.; Country: India

Not Applicable