• Purpose-built bone cracker configuration for reducing larger autogenous bone pieces into smaller chips or slurry for bone grafting.
• Designed to reduce larger autogenous bone pieces into smaller particles for bone-regeneration or grafting procedures.
• Precision-finished working area supports controlled clinical handling.
• Constructed from reusable metal surgical instrument for professional reusable use.
• Balanced instrument geometry supports dependable hand control during routine procedures.
• Smooth, cleanable surfaces support standard dental instrument reprocessing.
• Suitable for repeated use when inspected, cleaned and sterilized according to validated clinic protocols.

GDC Bone Cracker for Large Bone Pieces (IMPBMR) is designed for professional dental use where controlled handling and precise instrument positioning are important. Its working form supports reducing larger autogenous bone pieces into smaller chips or slurry for bone grafting. The model code IMPBMR identifies the exact GDC configuration for ordering and clinical set management.

Constructed from reusable metal surgical instrument, the instrument is intended for repeated professional use when correctly cleaned, inspected and sterilized. Before each procedure, confirm that the working end, joint and handle surfaces are intact and functioning smoothly. After use, remove debris promptly, clean and dry the instrument thoroughly, process it using a validated dental instrument sterilization protocol, and store it in a protected cassette or tray.

• Product Type: Bone Cracker
• Model / Code: IMPBMR
• Material: Reusable metal surgical instrument
• Primary Use: Reducing larger autogenous bone pieces into smaller chips or slurry for bone grafting
• Reusability: Reusable professional dental instrument

1 Pack Contains:
• 1 × GDC Bone Cracker for Large Bone Pieces (IMPBMR)

1. Inspect, clean and sterilize the bone cracker before use.
2. Prepare the harvested bone pieces according to the surgical grafting protocol.
3. Place an appropriate bone piece into the crushing chamber without overfilling it.
4. Apply controlled pressure to reduce the bone into smaller particles suitable for the planned grafting procedure.
5. Retrieve the processed bone material using sterile technique.
6. Disassemble as applicable, clean thoroughly, dry, sterilize and store after the procedure.

Manufactured by: GDC Fine Crafted Dental Pvt. Ltd.; Country: India

Not Applicable