• Product Type: Visco-Gel temporary soft denture liner
• Formulation: Available in powder and liquid for hand mixing
• Additional Component: Includes liquid separator for ease of use

Visco‑Gel acts as a cushioning layer between the denture base and the soft tissues of the mouth, helping to improve patient comfort — especially when the tissues have been stressed or changed due to trauma, surgery, infection, or natural adjustments

• Composition:
• Polyethylmethacrylate
• Ethyl alcohol
• Citrate ester plasticizer
• Separator Ingredients: Mineral oil, spearmint oil
• Storage Instructions: Keep out of direct sunlight and store in a well-ventilated area at 10–24 °C

• 1 x 120g Visco-gel Powder
• 1 x 90ml Visco-gelLiquid
• 1 x 15ml Lubricant
• 1 x Bowl Powder
• 1 x Liquid Measure

Cleaning and Preparation:

• Clean the denture thoroughly using a brush and detergent solution.
• Disinfect according to the manufacturer’s or dental laboratory’s instructions.
• Relieve pressure areas and undercuts by grinding.
• Rinse and dry the denture surface completely.

Application of Separator:

• Apply the provided brush-cap Separator only to areas where bonding is not desired, such as external denture base and denture tooth surfaces.
• Do not apply the brush to contaminated or non-disinfected denture surfaces.

Mixing the Visco-Gel Temporary Soft Denture Liner:

• Use the indicated measure to obtain the correct powder-to-liquid ratio.
• Lightly tap the powder before measuring.
• Recommended ratio: 1 measure powder (3 g) : 1 measure liquid (2 ml).
• Dispense one measure of powder into the mixing vessel.
• Add one measure of liquid and mix for 30 seconds at room temperature.

Application of Visco-Gel Temporary Soft Denture Liner:

• Cover the tissue-contacting surface of the denture with the mixture.
• Moisten fingers to handle the tacky mixture if needed.
• Insert the denture into the mouth approximately 2–3 minutes from the start of mixing.
• Remove excess material from areas such as retromolar spaces.
• Instruct the patient to close gently in normal occlusion and remain at rest for at least 2 minutes.
• Have the patient read aloud or perform functional movements/border molding for ~2 minutes.
• Remove the denture approximately 7–8 minutes from the start of mixing.
• Check coverage, especially in border areas, and trim excess material with a sharp instrument.

Maintenance and Follow-Up:

• Recall the patient after a few days to evaluate the Visco-Gel liner.
• Add new mix to deficient areas if necessary and continue treatment until tissues return to normal.
• After tissue conditioning, proceed to functional impression-taking, soft lining, or standard rebasing/remaking techniques.

Maintenance of Visco-Gel Treated Dentures:

• After 1 day in the mouth, clean dentures by gentle brushing with a soft-bristled brush and clear water.
• Do not use chemical cleansers or immerse the denture in cleaning solutions.

• Country Of Origin: United States of America
• Manufacturer: Dentsply

• Warranty is not applicable for this product.