• Advanced strontium glass technology provides superior biocompatibility and lowers thermal expansion mismatches to prevent post-treatment sensitivity.
• Extremely low film thickness of 15 microns permits accurate seating and tight marginal adaptation of fixed restorations.
• Extended working phase keeps the material fluid for up to 2 minutes, giving ample time for crown loading and precise positioning.
• Precise metered dropper system facilitates exact powder-to-liquid dosing using a 1 scoop to 2 drops ratio.
• Chemical adhesion to both tooth structure and metallic substrates eliminates the necessity for separate bonding agents.
• Continuous fluoride release aids in preventing secondary caries formation around restoration margins.
• Moisture-impermeable pharmaceutical glass powder bottle safeguards material freshness and prevents environmental degradation.

D-Tech Lute Plus Strontium Glass Ionomer Cement is a chemically cured Type I luting material developed for the definitive cementation of indirect dental restorations. Utilizing fine micro-particle technology with an average size of 5 microns, this luting agent creates a thin 15-micron film layer that ensures complete restoration seating without hydraulic resistance. The strontium-based matrix mimics natural tooth expansion dynamics, substantially diminishing post-operative thermal shock and patient discomfort. This complete powder-liquid system provides strong chemical adhesion directly to tooth dentin and metal alloy surfaces, securing a long-lasting marginal seal. With an operational fluid state extending up to 2 minutes and a quick 4-minute setting profile, clinicians benefit from adequate handling windows alongside timely setting stability. Please note that this specific product unit carries a short expiration date of January 2027 (01-2027), making it an ideal choice for high-volume practices seeking reliable quality for immediate clinical use.

• Material Classification: Type I Strontium Glass Ionomer Cement
• Particle Size: Ultra-fine (d50 - 5 microns)
• Film Thickness: 15 microns
• Mixing Time: 30–45 seconds
• Working Time: Up to 2 minutes
• Setting Time: 4 minutes
• Chemical Bonding: Direct adhesion to enamel, dentin, and metal alloys
• Radiopacity: High radiopacity for diagnostic imaging
• Fluoride Release: Continuous long-term fluoride release
• Shelf Life Expiry: Short Expiry 01-2027

1 Pack Contains:
• 1 × Powder Bottle – 12 g
• 1 × Liquid Dropper Bottle – 9 g
• 1 × Powder Scoop
• 1 × Mixing Pad

Clean and thoroughly dry the prepared enamel, dentin, and inner surfaces of the restoration. Gently shake the glass bottle to homogenize the powder prior to opening. Dispense 1 level scoop of powder and 2 drops of liquid onto a glass slab or mixing pad, holding the dropper vertically. Rapidly incorporate the powder into the liquid in small portions within 30 to 45 seconds to form a smooth, glossy mix. Coat the inner surface of the restoration immediately while the mixture remains glossy and seat it in place within the 2-minute working frame. Maintain firm placement pressure until initial setting occurs, then remove excess material promptly using suitable hand instruments.

Manufactured by: D-Tech Dental Technologies, India

Not Applicable