• Complete C-silicone system combines tray material, wash material and activator
• Putty consistency supports tray loading and pressure build-up
• Light Body material records finer preparation detail
• Universal Activator is used with the Speedex system components
• System supports established putty-wash impression techniques
• Manufacturer reports dimensional stability that can support delayed model pouring within the stated conditions

Coltene Speedex Putty Set (Condensation Silicon) is a coordinated C-silicone impression system for putty-wash techniques. The set combines the high-viscosity Speedex Putty with Light Body wash material and the Universal Activator required to initiate setting.

The pack format provides the principal materials needed for the Speedex impression workflow. Accurate dosing and homogeneous mixing are important for predictable working and setting behavior, so clinicians should follow the current COLTENE instructions for component ratios, intraoral timing, disinfection and model-pouring guidance.

• Material: Condensation silicone (C-silicone)
• System components: Putty, Light Body and Universal Activator
• Putty quantity: 910 ml
• Light Body quantity: 140 ml
• Activator quantity: 60 ml
• Dimensional stability: Up to 7 days under the manufacturer conditions

1 Pack Contains:
• 1 × Speedex Putty – 910 ml
• 1 × Speedex Light Body – 140 ml
• 1 × Speedex Universal Activator – 60 ml
• 1 × Dosing Scoop

1. Prepare the tray, oral field and required Speedex components before mixing.
2. Dose the Putty and Universal Activator according to the current COLTENE instructions and mix until homogeneous.
3. Prepare the Light Body with the specified amount of Universal Activator.
4. Apply the wash material and load the tray using the chosen putty-wash technique.
5. Seat the tray and keep it stable until the impression has set completely.
6. Remove, inspect and disinfect the impression in accordance with the manufacturer instructions.

Manufactured by: Coltene Whaledent, Switzerland

N/A