• Ergonomic lightweight construction helps minimize clinician wrist and hand strain during long procedures.
• Precise 1:1 drive gear configuration produces stable torque output for smooth dental material trimming.
• External irrigation line delivers targeted fluid flow to dissipate frictional heat and clear debris efficiently.
• Low vibrational runout combined with quiet operation under 70 dB ensures optimal treatment comfort.
• Wrench-locking chuck mechanism holds long-shank burs firmly to eliminate accidental slippage under load.
• Universal E-type connection offers seamless compatibility with standard air motors and electric micromotor units.
• High-grade metallic housing resists corrosion and survives repeated high-temperature autoclave cycles.

The Being Foshan Straight Handpiece is a low-speed, 1:1 E-type attachment for controlled trimming, finishing, polishing, and laboratory-style adjustments. It operates with compatible air or electric micromotors and accepts standard 2.35 mm HP burs through a secure wrench-type chuck.

Its straight profile and stable torque transfer make it suitable for denture adjustment, acrylic trimming, provisional restoration finishing, and selected procedures requiring a long-shank rotary instrument. The external cooling attachment can direct water toward the working area to reduce frictional heat and remove debris.

The lightweight metal body is designed for balanced handling, while the internal drive supports rotational speeds of approximately 22,000–27,000 RPM with low operating noise. After use, the handpiece should be cleaned, lubricated, packaged, and steam sterilized at up to 135°C according to the manufacturer’s reprocessing instructions.

• Transmission Ratio: 1:1 direct drive
• Operational Speed: 22,000 to 27,000 RPM
• Operating Air Pressure: 245 to 392 kPa (2.5 to 4.0 kgf/cm²)
• Operating Water Pressure: 198 kPa (2.0 kgf/cm²)
• Chuck Type: Wrench-type retention mechanism
• Bur Compatibility: Standard HP burs (2.334 mm to 2.355 mm diameter)
• Cooling System: External water spray attachment
• Noise Emission: ≤ 70 dB
• Autoclave Sterilization: Fully steam sterilizable up to 135°C
• Connection Type: Standard ISO E-type connection

1 Pack Contains:
• 1 × Straight Handpiece Unit
• 1 × External Water Nozzle Pipe
• 1 × Chuck Wrench Key
• 1 × Instruction Manual

1. Ensure the handpiece is cleaned, lubricated, and sterilized before use.
2. Align the E-type interface with a compatible micromotor and push until it is fully engaged.
3. Insert a compatible 2.35 mm HP bur and secure it with the supplied chuck wrench.
4. Connect the external cooling tube when water irrigation is required.
5. Set the motor and air supply within the recommended operating range.
6. Perform trimming or finishing with controlled pressure and avoid stalling the bur.
7. Remove the bur, disconnect the handpiece, clean and lubricate it, then autoclave at up to 135°C.

Manufactured by: Being Foshan Medical Equipment Co., Ltd., China

Not Applicable