• Enhanced hydrophilic properties allow effortless wetting of oral tissues even in the presence of saliva or fluid.

• Thixotropic shear-thinning characteristics keep the material stable at rest while encouraging smooth flow under seating pressure.

• Exceptional dimensional stability permits long-term storage and repeated model pours without compromise.

• Soft initial putty consistency reduces displacement of the light body wash, capturing subgingival margins cleanly.

• Superior tear strength resists distortion and tearing near thin preparation margins during mouth removal.

• Versatile handling supports both single-step simultaneous and two-step putty-wash clinical techniques.

• Outstanding elastic recovery guarantees shape retention after withdrawal across deep undercut areas.

Avue Gum Putty & Light Body is a premium vinyl polysiloxane (VPS) addition-cure silicone impression material engineered for high-precision restorative and prosthetic procedures. Featuring advanced hydrophilic chemistry, Avue Gum effortlessly displaces intraoral fluids and saliva, ensuring complete surface wetting and capture of intricate preparation margins.

The system combines a high-viscosity, soft-consistency putty with a smooth, low-viscosity wash. Thanks to its thixotropic nature, the light body remains firm on the tray or syringe tip but flows readily into deep subgingival areas under pressure. High tear strength and dimensional stability prevent distortion during tray withdrawal, allowing clinicians to store impressions and pour multiple master casts up to one month later.

• Composition: Vinyl Polysiloxane (Addition Silicone)

• Material Viscosity: Heavy Consistency (Putty) & Low Viscosity (Light Body)

• Working Time: 1 minute 30 seconds

• Setting Time: 3 to 4 minutes

• Surface Wettability: High hydrophilicity under moist intraoral conditions

• Dimensional Stability: Castable up to 30 days without loss of accuracy

• Detail Reproduction: High fidelity around fine subgingival preparation margins

• Elastic Recovery: High recovery following removal from undercuts

• Tear Strength: High resistance to marginal tear during removal

1 Pack Contains:

• 1 × 500 g Putty Base Jar

• 1 × 500 g Putty Catalyst Jar

• 2 × 50 ml Light Body Cartridges

• 12 × Auto-mix Tips

• 12 × Intraoral Tips

Prepare and dry the target teeth and surrounding tissues, maintaining proper isolation.

Dispense equal proportions of base and catalyst putty paste using the provided measuring spoons.

Knead the putty components thoroughly with fingertips until a uniform, streak-free color is achieved.

Load the homogenous putty into an appropriate dental impression tray.

Bleed a small amount from the light body cartridge before attaching a dynamic mixing tip.

Express the light body wash directly onto the prepared tooth margins using intraoral tips or coat the putty tray.

Seat the loaded impression tray firmly in the patient's mouth and hold steadily until fully set in 3 to 4 minutes.

Remove the tray smoothly from the mouth, rinse under cold water, disinfect, and store for pouring.

Manufactured by: Dental Avenue, India

Not Applicable