* Advanced optical geometry provides parallel light rays and excellent beam collimation for consistent curing depth.
* Generates uniform light distribution across the full surface area of the 10 mm light guide.
* High intensity allows effective 5-second polymerization for compatible restoration materials.
* Vent-free seamless exterior body simplifies surface cleaning and cross-contamination control.
* Ergonomic, lightweight cordless design reduces hand fatigue during repetitive clinical routines.
* Intuitive two-button operational interface provides simple selection of curing times.
* Includes dedicated tack-cure mode for effortless removal of excess temporary cement or resin.
* Long-lasting lithium-ion battery provides extended operation with consistent power delivery.

The 3M ESPE Elipar DeepCure L LED Curing Light is engineered to deliver reliable, deep, and uniform polymerization across restorative procedures. Built with advanced optics, this curing unit minimizes beam divergence, ensuring that light energy penetrates effectively into deep cavity preparations even when optimal light positioning is challenging.

Designed with a high-durability, lightweight plastic housing, the device offers excellent balance and control while eliminating fan vents for seamless surface disinfection. Featuring an intuitive two-button control panel and standard timer presets, clinicians can easily select exposure times suited for various composite resins, bonding agents, liners, and cements.

* Light Source: High-intensity LED
* Wavelength Range: 430 nm to 480 nm (Peak: 455 nm ± 10 nm)
* Light Intensity: Approximately 1470 mW/cm²
* Light Guide Diameter: 10 mm
* Power Source: Rechargeable Lithium-ion battery
* Battery Capacity: Approximately 60 minutes of operational curing time
* Full Charge Time: Approximately 120 minutes
* Housing Material: Lightweight, vent-free, high-durability plastic
* Curing Modes/Timer: 5, 10, 15, 20 seconds, continuous mode (120 seconds), and tack-cure mode (1 second)
* Handpiece Weight: 180 g (including light guide)
* Handpiece Dimensions: 28 mm diameter, 270 mm length

1 Pack Contains:
* 1 × Elipar DeepCure L Handpiece
* 1 × 10 mm Light Guide
* 1 × Eye Protection Shield
* 1 × Charging Base with Power Supply
* 1 × Operating Instructions Manual

1. Attach the disinfected 10 mm light guide securely into the handpiece socket.
2. Position the protective glare shield onto the light guide stem.
3. Select the required exposure duration based on the restorative material instructions.
4. Place the light tip as close as possible to the surface of the restoration without touching the uncured material.
5. Press the start button to initiate the curing cycle and hold the light steady until the cycle completes.
6. Clean and sanitize the light guide and handpiece after every patient procedure according to infection control protocols.

Manufactured by: 3M Deutschland GmbH, Germany

1 Year Manufacturer Warranty